| Assembly Properties
|
Thickness - Displays overall
slab thickness.
|
| Preview
|
Displays the selected catalog item in the preview
window. This displays changes and the preview updates as various options are
chosen. The preview also changes dynamically with some of the prominent
settings on the Placement tab, e.g Height, Rotation angle, etc. A right-click
in the Preview opens a
SHOW/HIDE Viewing Tools options menu:
Zoom In - Zooms in about center of
preview.
Zoom Out - Zooms out about center of
preview.
Pan - Moves the preview following the
pointer. Click again to stop panning.
Fit - Fits the object to the extents of
the preview.
Rotation - Sets the orientation of the
selected item in the preview to one of the standard orientation options:
- Isometric
- Right
Isometric
- Top
- Bottom
- Left
- Right
- Front
- Rear
Display Mode - Sets the display of the
selected item in the preview to one of the standard display modes.
- Solid
- Wire
Frame
- Visible Edge
- Filled Visible
Edge
For
Place workflow, the
Hide/Show Preview controls displaying
preview of the element currently selected for placement.
|
| Add Layer
|
Adds a new layer to the compound slab assembly.
Note: After adding a
new layer, selecting the catalog type from the
Leaf Name field is mandatory.
|
| Delete
|
Deletes the selected layer from the compound slab
assembly.
|
| Move Layer Up
|
Moves the selected layer up one position in the
hierarchy.
|
| Move Layer Down
|
Moves the selected layer down one position in the
hierarchy.
|
| Leaf Name
|
The Leaf Name consist of different leaf (layer)
catalogs. Double-clicking with the left-mouse click on an added layer opens the
drop-down list of leaf (layer) catalog type from where the catalogs can be
selected.
|
| Thickness
|
Sets the slab thickness by accepting a numeric
value.
|
| Core
|
Sets core for the selected layer from the compound
slab assembly.
|
| Edge Setback
|
Sets the distance of the slab overhangs by
accepting numerical values or is set back from the perimeter of the slab that
is drawn.
|
| Infill Edge
|
Specifies the edge condition for each compound slab
layer defined by edge setback value where different material assignment
required at the perimeter for insulation or finish material. This is handled by
the material assigned by different catalog layer as Edge Leaf name.
Note: You need to
first select the
Infill Edge to enable the
Edge Leaf Name.
|
| Edge Leaf Name
|
Enables after selecting
Infill Edge. Double-clicking with left-mouse
click opens the catalog type list.
|
| OK
|
Saves the changes and closes the dialog.
|
| Cancel
|
Closes the
Compound Slab
Editor dialog box without saving any changes.
|
